DUO (Adhesive + Sealant) (CLUSTERS + STRIPS)

Can be used for cluster lashes and strip lashes

Includes:

1 Wisp Taker Glue

1 Wisp Taker Sealant 2.0

Wisp Taker Glue Ingredients: Acrylate copolymer, Aqua

Wisp Taker Sealant Ingredients:  Water, Propylene Glycol, Glycerin, PVP, Butylene Glycol, Sodium Hyaluronate, Methylparaben, Phrnoxyetbonal, Disodium EDTA

Disclaimer: Even though it is hypoallergenic, it relatively will not cause reaction to most allergies. It is not guaranteed to prevent irritation for every single allergy. Please perform a small patch test on yourself, wait 24-48 hours to see if skin irritates before applying to eyelid. Every person's body chemistry is different and we are not held responsible for any allergic reactions.

Clusters Directions:

1. Clean lashes and make sure they are free of product and oil 
2. Work in sections 
3. Apply 2-3 layers of Wisp Takers Glue to natural lashes from root to tip and wait until tacky (about 10 seconds) 
4. Apply false lash to natural lash only and not the waterline 
5. Repeat until desired look is achieved 
6. Pull down lashes and apply 1-2 layers of Wisp Takers Sealant on top of lashes where false/natural lashes connect  
7. Wait about 30 seconds-1min for sealant to dry down 
8. Apply sealant to tweezers and clamp false and natural lashes together with tweezers tightly

9. Wait 1hr+ pull test and 24-48hrs for water test for best results

Strip Lashes Directions:

1. 1. Clean lashes and make sure they are free of product and oil
2. Apply 2-3 layers of Wisp Takers Glue to eyelid and wait until tacky (about 10 seconds)
3. Apply strip lash to the middle of eyelid close to lash line as safely possible 
4. Repeat for both ends of strip
5. Apply sealant to eyelid
6. Clamp false and natural lashes with tweezers
7. Wait 24-48 hours before getting wet for best results