Lash Fan

Clusters Directions:

1. Clean lashes and make sure they are free of product and oil
2. Work in sections
3. Apply 2-3 layers of Wisp Takers Glue to natural lashes from root to tip and wait until tacky (about 10 seconds)
4. Apply false lash to natural lash only and not the waterline
5. Repeat until desired look is achieved
6. Pull down lashes and apply 1-2 layers of Wisp Takers Sealant 2.0 on top of lashes where false/natural lashes connect
7. Wait about 30 seconds-1min for sealant to dry down
8. Apply sealant to tweezers and clamp false and natural lashes together with tweezers tightly

9. Wait 1hr+ pull test and 24-48hrs for water test for best results

Strip Lashes Directions:

1. Clean lashes and make sure they are free of product and oil
Apply 2-3 layers of Wisp Takers Glue to eyelid and wait until tacky (about 10 seconds)
Apply strip lash to the middle of eyelid close to lash line as safely possible
Repeat for both ends of strip
Apply sealant to eyelid
Clamp false and natural lashes with tweezers
Wait 24-48 hours before getting wet for best results